These examples are based on Kingspan Thermaroof® TR LPC/FM, waterproofed using a mechanically fixed single–ply membrane. The insulation board is. TR26 Flat Roof Insulation by Kingspan Thermaroof mm – m2 Pack from Kingspan. (ITR). Order Helpline ☎ Kingspan Thermaroof TR26 is faced on both sides with a low emissivity composite foil, autohesively bonded to the insulation core during manufacture.
|Published (Last):||11 January 2008|
|PDF File Size:||13.30 Mb|
|ePub File Size:||1.21 Mb|
|Price:||Free* [*Free Regsitration Required]|
TR26 is suitable for use with most mechanically fixed single-ply waterproofing membranes. The waterproofing membrane is also mechanically fixed in accordance with the membrane manufacturer’s instructions, over the whole insulated area including any insulation upstands, as soon as possible after laying tf26 insulation boards.
Turn up the vapour control layer at the edge of the roof to a height appropriate to the specified waterproofing membrane. Water Vapour Control TR26 should kinhspan installed over a separate vapour control layer, in new build roofs, unless it is being used in conjunction with a sealed metal deck.
Kingspan TR26 50mm, 6 x 1.
Durability If correctly applied, the TR26 Boards have an indefinite life. The waterproofing membrane is also mechanically fixed in accordance with the membrane manufacturer’s instructions, over the whole insulated area including any insulation upstands, as soon as possible after laying the insulation boards.
Ensure that safe methods of cleaning are used, as recommended by the suppliers of the spilt liquid. Subject to product availability locally, and vehicle delivery slots. If the metal deck is not sealed the vapour control layer should be loose-laid. Green roof systems are a specialist design area. Please allow extended lead times on PIR and Phenolic foam insulation. Share Facebook Twitter LinkedIn. In refurbishment projects, where TR26 is to be installed over an existing bituminous waterproofing membrane, the membrane can be used as a vapour control layer, as long as it is in a good water tight condition.
Green Roofs TR26 is suitable for use under most green roof systems. In refurbishment projects, where TR26 is to be installed over an existing bituminous waterproofing membrane, the membrane can be used as a vapour control layer, as long as it is in a good water tight condition.
The vapour control layer should be loose-laid over the deck. Damaged boards or boards that have been in contact with harsh solvents or acids should not be used. ThermaRoof TR26 is a foil faced insulation for flat roofs with mechanically fixed single-ply waterproofing.
Regardless of the deck type it is recommended that a condensation risk analysis is carried out for every project. Learn about acoustics in buildings. Kingspan TR26 60mm, 5 x 1. The insulation core is resistant to short—term contact with petrol and with most dilute acids, alkalis and mineral oils.
Click for more information Kingspan TR31 Structural insulation faced with plywood composite for flat roofs waterproofed with partially bonded built—up felt Click for more information Kinfspan TD Celotex Tempchek Deck TD Range is PIR insulation bonded to plywood for, use in smaller flat roof applications. Where one run of the specified ttr26 control layer laps another, there should be minimum mm side and end overlaps, which should be adequately kingsspan.
Kingspan TR26 50mm, 6 x 1. Kingspan TR26 mm, 3 x 1.
We will endeavour to source the required stock, however, we may need to mix and match equivalent products from multiple manufactures, suppliers and depots. Ensure that safe methods of cleaning are used, as recommended by the suppliers of the spilt liquid. Don’t hesitate to contact us. Contact our experienced technical services department today.
Kingspan TR24 Fibre free, rt26 insulation used for flat roofs that is compatible with the majority of torch applied waterproofing system Click for more information Kingspan TR27 Glass tissue faced insulation for fully adhered single-ply, tf26 bonded built-up felt, mastic asphalt waterproofing. Learn about your options for drainage on flat roofs.
TR26 |Flat Roof Insulation | Kingspan | Ireland
Buy Kingspan Therma Range of Rigid PIR Insulation Boards
Where these requirements cannot be ensured, the insulation must be mechanically fixed. Manufactured in Castleblayney this non-fibrous insulation is fully compatible with most green roof systems and installation technique is ideal for fast track building programmes. The insulation core is not resistant to some solvent—based adhesives systems, particularly those containing methyl ethyl ketone.
A 25 mm thick TR26 upstand should be used around the perimeter of the kinvspan on the internal fagade of parapets. Quick links Product information. If correctly applied, the TR26 Boards have an indefinite life. Result Dependent on single-ply membrane adopted Further details on the fire performance of Kingspan Insulation products may be obtained from the Kingspan Insulation Technical Service Department see below.
The insulation core is resistant to short—term contact with petrol and with most te26 acids, alkalis and mineral oils. Insulation for flat roofs waterproofed with partially bonded torch applied multi—layer bituminous waterproofing. Specifications Useful links Case Studies. Boards of TR26 should be secured to the deck using mechanical fixings e.